Green House Feeding Calcium

Description

Green House Feeding Calcium is chelated.

Apply in situations in which the amount of calcium present in the water is below the recommended values.

Green House Feeding Calcium is chelated with EDTA. Will not react with other elements.

Chelated Calcium prevents and corrects deficiencies. Most are due to a lack of/or imbalance in the assimilation of Calcium.

Maximum Solubility: 2.5lb/gal or 300g/L water Recommended amount for stock solution: 12oz/gal or 90g/L water

R/O System

if you use R/O water, it is necessary to supplement with calcium. *Please check your R/O system regularly (maintenance)

INDICATION FOR THE USE OF CALCIUM

R/O and very soft > Recommended Values Soft > 50-80% of recommended values Moderately Hard > 10-50% of recommended values Hard Water > No Calcium required

GHF Mixing Guide

How to use:

Green House Powder Feeding suitable for every medium.

However the feeding schedule is slightly different and if using anything than soil we recommend using a PH- and EC-meter in order to achieve the desired values and have full control over your feeding solution.

Easy Grower

If you grow on pre-fertilized soil we recommend starting using Powder Feeding 2-4 weeks after planting the seeds and to start with a mild solution (0.25g per Liter).

During the vegetative stage you can increase the feed- ing up to 0.5g per Liter. With the beginning of the flowering stage you should slowly increase the amount of Powder Feeding until you reach 1g per Liter.

Following this schedule, there should usually be no problem and growers will achieve a good yield.

Experienced Grower

Experienced growers usually measure their feeding solution to provide the plants with the exact amount of nutrients and the correct pH value of the solution.

Whether you grow in coco, hydroponics or aeroponics – with all of these systems you should measure your pH and EC values.

When using a pH and EC meter you can optimize your growing and achieve much better results.

Steps of mixing nutrient solution:

1. Check pH and EC value of the water and make sure the temperature is about 18-22 degrees Celsius. You should also check if your water contains enough Calcium. If your EC is 0,0 (using RO or rain water) you need to add Calcium to your water before adding Powder Feeding. Make sure your EC rises up to 0.3-0.4 EC
2. Add Powder Feeding and mix well for 2-3 minutes, and then measure the EC value. If necessary repeat until you reach the desired value.
3. When you reached the desired EC value, wait for 15-30 min.
4. Then measure the PH and if necessary adjust it using PH up or PH down – mix good for 2-3 minutes and wait again 15-30 minutes before measuring.
5. When you reached the desired values, feed your plants.

A 10 gr. dosage spoon INCLUDED in every bag!